P30 Aerovee Engine Installation.
Oil Temp Sender.
Decided that I will drill and tap the oil block off plate on the front of the engine for the oil temp sender.
Prop Hub Inserts.
I used a 5/16th bolt, washers and a 5/8th socket to be sure the inserts were properly and fully inserted.
Intake Manifold.
I used some alcohol and rags to clean out the inside of the intake manifold. I put the hoses on the intake elbows. I placed the intake manifold in place. I then determined where to drill a hole in the tab to attach it to the engine case bolt. I drilled the hole and put the manifold back to check it's placement. It looks like it will work ok.


Click on a link to view the video:

2014-02-15-CAM-1.wmv