F02 Wing Rigging.
Rear Spar Carry Through.
With the wings off I was able to install the remaining rivets for the side attach angles.
Drilling the Main Spar Attach Holes.
After close inspection of the holes today I determined that the hole through the right hand forward wing attach angle on the side of the fuselage was not good. The hole was not a close fit to the bolt. All other hole locations appear to be good. So I have decided to replace the RH Fwd attach angle. Today I carefully drilled out all of the rivets and removed the RH Fwd Attach angle. I ordered a replacement from Sonex. I will install it when it arrives.


Click on a link to view the video:

2014-01-09-CAM-1.wmv