F06-02 Glare Shield Assembly.
I fit the location of the Cross Tie Plates and the Instrument Panel Cross Tie. I clamped the Cross Tie Plates in location. I drilled the pilot holes that attach to the Glare Shield. I clamped the Instrument Panel Cross Tie in its location. I drilled the pilot holes throught the Cross Tie Plates and Instrument Panel Cross Tie. I used a yard stick ruler to be sure the cross tie was straight across the assembly. I drilled the pilot holes through the panel and the cross tie.

F06-01 Glar Shild Install.
I removed all the clecos from the glar shield assembly and put it into the fuselage with clecos. I drilled the 4 holes on each side through the cross tie plates, longerons and glar shiled. I then drilled all the remaining pilot holes through the glare shield and longerons. I filr the firewall attach angles in their locations. I drilled a few pilot holes through the attach angles and glare shiled. I then removed the upper firewall to gain access to the remaining pilot holes for the glare shield. I drilled all the holes to #40 and then #30. I then deburred abd riveted the attach angles to the glare shield. I put the upper firewall back in place with clecos. I drilled all the #40 pilot holes through the attach angles and the upper firewall.

Click on a link to view the video: