F07-08 Fuel Tank Stop Angles. F07-09 Center Firewall Attach Angle. F07-10 Side Firewall Attach Angles.
I cut the required lengths from Z02-03 Angle Stock.
I used the band saw to cut the sides to the required widths.
I used the scotch brite wheel the smooth the edges.
I used the drill press to drill the required #40 holes.
For the firewall attach angles I clamped the 90 degree stock to the bending brake. I then used the hand seamer to bend one side to open up the angle to 66 and 60 degrees per the plans.

F07-05 Instrument Panel Cross Tie.
I cut the required length from the Z03-02 Channel Stock.

Click on a link to view the video: