L04-01 Tri-Gear Main Landing Gear Mount.
Right Hand Gear Mount. I up drilled all the holes to their final size. I removed the mount and side panel angle to up drill the holes in that location. Clecoed the gear mount back in location to be sure every thing fit. It did. I then removed both gear mounts and the angles and gussets from the side panels.
I then removed the aft spar tunnel as an assembly.
I also test fit the flap drive tube and assembly block. Before I start on the glare sheild and pannel I want to fit as much below them as possible.


Click on a link to view the video:

2013-05-22-CAM-1.wmv