F12-01R Right Hand Forward Side Assembly.
I removed the clecos and parts that had holes up drilled yesterday. I deburred the holes and used clecos to complete the assembly. I used blue painters tape to mark the clecos that do not get rivets at this time. I installed all the rivets called out in the plans. I installed all the AN525-10R12 bolts and torqued them to 25 in/lbs.
F12-01L Left Hand Forward Side Assembly.
I layed the skin flat on the work table. I clamped the F13-02L upper longeron in place (22") from the botton skin edge. I drilled the #40 pilot holes and clecoed the longeron in place.

Click on a link to view the video: