F13-02L Left Hand Upper Longeron Assembly.
I made the counter sink for the bolts holding the Canopy Striker Plates. I sanded and deburred the longeron. I installed the bolts holding the canopy striker plates. I installed the rivets holding the loneron doubler.
F13-02R Right Hand Upper Longeron Assembly.
I sanded and deburred the longeron. I installed the rivets holding the longeron doubler.
F12-01R Right Hand Forward Side Assembly.
I cleaned off the manufactures ink markings on the F13-01 Forward Fuselage Side Skin. I laid the skin flat on the work table. I clamped the F13-02R Right Hand Upper Longeron to the table in position over the side skin. I then drilled #40 pilot holes using the holes in the longeron as a guide. I also made sure to maintain a distance of 22" from the bottom of the skin and the top of the longeron.
Click on a link to view the video:
2013-02-16-CAM-1.wmv