L01 Landing Gear Installation.
L07 Optional Hydraulic Brakes.
Finished assembling the wheels and tires. Inflated the tires to 50 psi.
Installed the nut plates on the wheel pant mount plates. Threaded the 90 degree compression fitting and the bleed valves into the main brake body. I also inserted the pistons, o-rings and pucks into the main bodies. I put the wheel pant mount plates and brake main bodies on the axles. I packed the wheel bearing with grease. I assembled the wheels and bearings on the axles.

C08 and C09 Optional Center Controls.
I cut out the notch in the seat pan required for the center controls. I put the seat pan back into the fuselage and riveted the hinge halves to the spar tunnel.

Click on a picture to enlarge it: