L02-01 Nose Landing Gear Assembly.
I decided to drill the holes that will hold the Nose wheel pants bracket to the Nose Gear Strut. The Nose Wheel Pant Brackets are provided with the kit as flat sheet parts that need to be bent. I bolted the flat brackets to the strut. I used the flat brackets to locate the holes for the AN3-5A bolts. I clamped every thing in place and drilled the 3/16th holes.
Since I had the bracket parts out I decided to go ahead and finish bending the brackets to their final shape.
Next I located and drilled the 1/8th In. pilot holes in the steering cap. I used the drill press to drill the pilot holes.


Click on a picture to enlarge it:

gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail