F26-05 Upper Vertical Splice Plate.
The basic shaped stock was provided with the kit. I used the drill press to clean out the pilot holes. I used the arbor press to bend the parts to the 7/16" (13.6 deg) per the plans. I also used files and the scotch brite wheel to add the 1/16th inch chamfer as required per the plans. Files and the scotch brite wheel were also used to clean, polish and debur all the edges.

F26-06 Lower Horizontal Splice Plate.
I finished cleaning, polishing and deburring all the edges and surfaces. I used files and the scotch brite wheels.

Click on a picture to enlarge it:

gallery thumbnail gallery thumbnail gallery thumbnail