F02 Wing Rigging.
I continued with the wing rigging.
I verified that the wings were still level.
I set the wing incidence by placing a 2x4 and wood shims under the wings next to the fuselage. I measured to be sure that the distance from the bottom wing skin to the bottom of the fuselage skin was 3 5/32 inches. I clamped the wings in that position.
I checked to be sure that the wings were square by measuring from the tail to the out board corner of the top wing skin per the plans.
I started installing the rear spar carry through.
I drill some of the pilot holes from the side attach angles to the fuselage and the rear spar carry through.


Click on a link to view the video:

2014-01-05-CAM-1.wmv