F25-01L Left Hand Aft Side Panel.
I installed the cover plate. This assembly is now complete per the plans. Plans Page F25 is now completed.

F24-02 thru F24-09 Upper and Lower Cross Ties.
I cut all the cross ties to rough lengths using a hack saw. I then squared one end using the scotch brite wheel and belt sander. I cut the final length using the band saw. I finished up the final length using the scotch brite wheel and belt sander. I made sure that the corresponding upper and lower cross ties were the same proper length called for in the plans. I still need to cut -09 to the final length.


Click on a link to view the video:

2013-01-05-CAM-1.wmv