P30 Aerovee Engine Installation.
Air Cleaner.
I drilled and tapped a hole to attach the air cleaner assembly. I installed the air cleaner assembly.
Oil separator.
I drilled, up drilled and deburred the holes to attach the oil separator to the firewall. I need to get the bolts and anchor nuts to attach the oil separator. For now it is attached with clecos.
Coils for the Secondary Ignition.
I cut the stand offs. I drilled, up drilled and deburred the top holes to 1/4th size. I inserted temporary bolts in the top holes.

Click on a picture to enlarge it: