F02 Wing Rigging.
More work on the wing rigging. <>br>I removed the leveling tubing.
With some help I pulled the right wing out of the fuselage. Also partially pulled the left wing out of the fuselage. I filled the top of the fuselage opening for the right wing spar. I also up drilled the 3/16th holes on the rear wing spars to 1/4 holes. This matches the holes on the rear spar carry through. Pushed the left wing and then the right wing back into the fuselage.
I then centered the wings in the fuselage.
I set up the wing leveling tubes. I inserted a shim between the lower longeron and right wing spar. This leveled the wings.
Using clecos I put the aft spar tunnel, aft side vertical wing attach angles and gussets back into their place in the fuselage.
I connected the wing rear spars to the rear spar carry through using pins.
That is it for today.


Click on a picture to enlarge it:

gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail